Entice – Official Statement II

On July 10, 2019, Entice made an official statement about accusations that we had downloaded files from Renderosity and used them illegally in Second Life. At that time, we stated that we had not downloaded anything and, in fact, took our items to the original creator for her to look at so that she could verify that the items were not stolen. In my heart, we believed that they were originals made from scratch by our mesher since that is what we hired him to do. Even though the original Renderosity creator said that the UVs were not hers, we were still being accused of using her work and changing it in a way that made the UVs slightly different. So, because we wanted to be certain, we bought the actual files. We had them looked at by a third party to be certain that our mesher did his own work. We are happy to say that the work on this outfit was done by our mesher. Our mesh, is quite different than the one that can be purchased on Renderosity. We have given all of the proof of this to the Renderosity designer so that she is aware of everything.

As you can see, our mesh has a lot more detail to it including both the design and edging that is meshed in as well as quite a few structural differences in both the top (check the shape and gathering of both tops) and panties (where the back of ours is straight and theirs is bunched up) as well as the finished ends on our strings. Also, when looking at the photo where you can see the polygons, you can clearly see that they are made differently. The form clearly shows that it is not modified and pulled around, but actually made from scratch to fit the SL mesh body.

However, even before getting a second opinion of whether or not the outfits in question were copied, we made an agreement with the Renderosity designer to remove the items from our store and marketplace. Why would Entice do that? It is simple. We took an idea that someone else had and we re-made it. The problem is not that we did this so much as the Renderosity creator has told us that it is okay if we use her ideas. But, our item looked so close to the original that she was contacted about it. This is a problem. It is a problem because when a designer can’t easily tell if something is theirs or not, it becomes difficult to know if licenses have been broken. It also becomes a question of whether or not there was an intellectual property infringement.

Normally, if there is a question about legality of a product, a DMCA will be filed by the original creator. We did NOT have a DMCA filed against us, nor were we threatened with one. Instead, because we understood that the items that we produced are too close to the original items and therefore, could cause a hardship to the original creator, we respectfully removed all items from our store that were inspired by things we saw on Renderosity. This consisted of three fantasy releases. In all honesty, because we never had any intention of purchasing the original items and then remaking them to use in Second Life, I never in my life even considered that someone might think we had. That might make me stupid or naive but it is the truth.

So once again, I would like to apologize to everyone involved. To the very sweet Renderosity designer who has fought by our side in this battle against those who would have the world thinking that we are evil and malicious, all I can say is thank you. You are the most beautiful and genuine person that I have met in a long time and I consider you to be a friend and ally. To our customers, friends and event organizers, we are sorry to have used such poor judgement in creating items that were too close to the original inspirations. We have learned a lot from this situation and in the future, will be more careful about the items that we create so that our ideas are more our own creative choices and less replicas of things we have seen elsewhere. In short, we strive to add more originality to our original mesh.

Thanks again,
Jolene Carami & Kira Paderborn
(owners of Entice)

Entice – Official Statement

A few days ago, Entice was accused of downloading files from Renderosity to use illegally in Second Life. As you can imagine, it has taken us a few days to put together our statement as we had to contact the persons involved and gather all evidence. We would now like to take this time to respond to the accusations alleged against Entice.

In the designing process, we are often looking for inspiration; from magazines, movies, fashion blogs, pinterest, and sites like Renderosity. The mesh in question: Unstoppable, was created based on the images found on Renderosity: Shown here

Entice is comprised of 2 people: Jolene Carami and Kira Paderborn. Entice also hires 2 meshers to create original mesh that is exclusive to Entice. We contacted the mesher who created the accused item as soon as we were made aware of the situation. They immediately responded with 3D images of the UVs and the zbrush files. Our next course of action was to contact the designer on Renderosity.

It was explained to the Renderosity designer, that Entice was being accused of taking her mesh and repurposing it for use in Second Life. She was first shown side by side comparisons of her original mesh creation and Entice’s mesh. Although the 2 meshes are similar, there are differences that can be found. UV maps were then sent so that they may be looked at in further detail. After having reviewed the maps, Renderosity Mesher said that they were laid out differently and although they looked close to hers, they were not the same. Shown here

The Renderosity designer recommended that the item be discontinued so situations like this do not happen again. She was afraid that the item would be recognized by others and reported over and over.
Although this was not mandatory, out of respect to the Renderosity designer’s suggestion, we immediately removed the mesh: Unstoppable, along with another mesh: Lothlorien, that was created inspired by another one of her works. She also asked that in the future should Entice use her products as inspiration, that we would not re-created the item exactly. We promised that we would never use her work as inspiration in the future as we do not want to cause un-due stress. Shown Here Shown Here

To clarify further: The Renderosity designer had been contacted also by an anonymous person to confirm if this was her mesh that was stolen. She had replied in the affirmative, however it was in regards to her own artwork. Shown here. She hadn’t looked at the UVs at this point.

We also take slander very seriously. We have reported and will continue to report any persons slandering Entice. Shown here

To the valued patrons of Entice:
We apologize for any misgivings or distrust that we have inadvertently caused you. You are the reason why we exist. Without you and your faith in us, we couldn’t do what we are doing. We hope that this puts any doubts to rest.
Entice strives to maintain transparency with our patrons. We appreciate the people who take the time to bring their concerns to us, and would like to encourage open communication with respect from both sides. We welcome any and all questions or concerns you have about our brand. Also, thank you to all of you who have supported us through this ordeal. You make this all worth while.

Sincerely,
Jolene Carami & Kira Paderborn, owners of Entice

Entice – Cosmo!

“Bad Girls” Heels

Entice is at Cosmopolitan with the “Bad Girls” heels which come in Maitreya Lara, Slink Hourglass and Belleza Freya sizes. If you haven’t already guessed, they match the lingerie that is currently at the Frou Frou event till July 8th. The heels come in a HUD controlled Fatpack with many customization options!

Cosmopolitan runs from July 1st to 13th.
Click here to visit the event.

Entice – New Gift at the Main Store!

“Love Story” Dress – “Patriot” Gift

Entice will be putting out a gift, no group needed, at their Main Store location June 22nd (around noon slt). The “Love Story” dress in “Patriot” will be free to everyone and comes in Maitreya Lara, Slink (Physique, Hourglass and Belleza (Freya, Isis, Venus) sizes. The dress will also include a HUD with the colors Red, White and Blue in which you can mix and match them as you please! It is to celebrate Canada Day as well as July 4th, with Jolene being Canadian and Kira being American, they wanted to put out a gift that would work for both Countries.

The gift will be at the Entice Main Store starting midday, June 22nd.
Click here to visit the location.

Entice – The Trunk Show

“Love Story” dress

Entice is at the June round of The Trunk Show with the “Love Story” dress which comes in Maitreya Lara, Slink (Physique, Hourglass) and Belleza (Freya, Isis, Venus) sizes. There are eight individual dresses to choose from or a HUD controlled Fatpack of ten which allows you to mix and match the dress, pearls and ribbons!

The Trunk Show runs from June 19th – July 18th. Click here to visit.

Entice – The Guest List!

Entice is participating in The Guest List’s Cart Sale and Hunt – Summer Vacation with an exclusive lingerie color and a dress hunt gift!

“Seduction” Bra & Panties in Coral – TGL Exclusive

The “Seduction” bra and panties in Coral is an exclusive color for the event and comes in Maitreya Lara, Slink Hourglass and Belleza Freya sizes. It is on sale for a very low price during the event.

“Latex Love” Dress in Nude TGL Hunt Gift

The “Latex Love” dress in Nude is free when you find the strawberry on or near the Entice cart. The dress comes in Maitreya Lara, Slink (Physique, Hourglass) and Belleza (Freya, Isis, Venus) sizes.

The Guest List event runs from June 14th-23rd.
Click here to visit Entice’s location.

Entice – Frou Frou

Bad Girls Lingerie

Entice is at Frou Frou with “Bad Girls” lingerie which comes in Maitreya Lara, Slink Hourglass and Belleza Freya sizes. The set includes a harness top, pasties, panties and bottoms. The eight individual colors also include silver, gold and black metal options along with the included color. The HUD controlled Fatpack includes two bonus colors plus a HUD for mixing and matching each piece.

Frou Frou runs from June 10th-July 8th
Click here to visit the event.

Entice – Flourish Sales Studio

Panic Button Outfit in Seafoam

Entice has joined the Flourish event with the “Panic Button” outfit recolored in Seafoam which comes in Maitreya Lara, Slink Hourglass and Belleza Freya sizes! The set, which includes the corset, panties, Bento gloves and pasties, is available for a huge discount during the event!

Flourish runs from June 10th-July 4th
Click here to visit Flourish.

Entice – Vintage Fair 2019!

Summer Baby Lingerie

Entice is at Vintage Fair 2019 with the “Summer Baby” lingerie which comes in Maitreya Lara, Slink Hourglass and Belleza Freya sizes. There are eight individual colors to choose from or a HUD controlled Fatpack of ten which includes two bonus colors! The HUD also allows you to change certain parts of the top (ruffle, main) and parts of the bottoms (waist, ruffle, bow and main) to get the ultimate custom look!

Vintage Fair 2019 runs from June 7th – 16th. Click here to visit the event!

Entice – The Designer Showcase

Entice’s Irreplaceable Tops

Entice is at the new location of The Designer Showcase event with the “Irreplaceable” tops which come in Maitreya Lara and Slink Hourglass sizes. There are eight prints to choose from or a HUD controlled Fatpack of ten.

The Designer Showcase runs from June 5th-28th. Click here to visit the event.